ANCHOR

Unicon anchor UC/UCS/UC-D Type

Drop-in anchor

JCAA

  • ■The leading tapping anchor boasting a large contact area and excellent tensile strength.
  • ■Operating performance is improved by the small preparation hole bore due to the collar outer diameter being narrower than the tap diameter. Overhead installation is also easier.
  • ■Features inner cone. Eliminates loss of cone during installation or "drop-out" after installation.

unika news PDF (700KB)

Dimensional Drawing

Thread dia Tightening Torque
W1/4 4 N•m
M8, W5/16 10 N•m
W3/8
(1030/3030B)
20 N•m
(10 N•m)
W1/2 35 N•m
Unicon anchor UC•UCS•UC-D Type

Uses

Concrete

Installation method

  1. Drill preparation hole.
  2. Position anchor.
  3. Strike cone with striking rod to set anchor.
  4. Secure fixture with bolt.

■Installation explanatory video

Unicon anchor UC•UCS Type Installation explanatory video

■Uses

Electrical, plumbing, air-conditioning/heating works.

Precautions on use

  • Wear safety protection equipment such as eye protection glasses, a helmet, etc. during use.
  • Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
  • Drill the preparation hole vertically against the drilled material surface.
  • Blow the hole thoroughly to remove shavings inside.

JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified
by the Japan Construction Anchor Association (JCAA).
UC type (Unichromate Treatment)FC=21N/mm2
Size Thread
dia
Dia
(mm)
Length
(mm)
Thread
Length

(mm)
Drilling condition
(mm)
Embedment
Depth

(mm)
Max.
extraction
strength

(kN)
Pcs./box Pcs./ctn JAN Code
Preparation
hole diameter
Penetration
hole depth
UC-2025 W1/4 8.0 25 10 8.5 25 25 7.9 100 1,000 4989270780040
UC-2530* W5/16 10.0 30 13 10.5 30 30 13.7 100 1,000 4989270780057
UC-3030B W3/8 12.0 30 12 12.5 30 30 20.1 100 1,000 4989270780262
UC-3040* 40 15 40 40 22.9 50 1,000 4989270780064
UC-4050* W1/2 16.0 50 20 16.5 50 50 38.4 50 500 4989270780071

*JCAA certified product

UC type/M (Chromate Treatment)FC=21N/mm2
Size Thread
dia
Dia
(mm)
Length
(mm)
Thread
Length

(mm)
Drilling condition
(mm)
Embedment
Depth

(mm)
Max.
extraction
strength

(kN)
Pcs./box Pcs./ctn JAN Code
Preparation
hole diameter
Penetration
hole depth
UC-830* M8 10.0 30 13 10.5 30 30 18.1 100 1,000 4989270780347
UC-1030 M10 12.0 30 12 12.5 30 30 14.8 100 1,000 4989270780569

*JCAA certified product

UCS type (Stainless)FC=21N/mm2
Size Thread
dia
Dia
(mm)
Length
(mm)
Thread
Length

(mm)
Drilling condition
(mm)
Embedment
Depth

(mm)
Max.
extraction
strength

(kN)
Pcs./box Pcs./ctn JAN Code
Preparation
hole diameter
Penetration
hole depth
UCS-3030B W3/8 12.0 30 12 12.5 30 30 13.1 100 1,000 4989270780200
UCS-3040* 40 15 40 40 17.2 50 1,000 4989270780163
UCS-4050* W1/2 16.0 50 20 16.5 50 50 23.0 50 500 4989270780170

*JCAA certified product

*Maximum extraction strength values are values measured by UNIKA and not standard values.

UC-D type (Hot-dip galvanization)FC=21N/mm2
Size Thread
dia
Dia
(mm)
Length
(mm)
Thread
Length

(mm)
Drilling condition
(mm)
Embedment
Depth

(mm)
Max.
extraction
strength

(kN)
Pcs./box Pcs./ctn JAN Code
Preparation
hole diameter
Penetration
hole depth
UC-3030D W3/8 12.0 30 12 12.5 30 30 14.6 100 1000 4989270780576
Hammering tool (Hand)
Size Anchor size Part No. Length(mm) JAN Code
PT-20 UC-2025 160 4989270943025
PT-25 UC-2530/830 160 4989270943032
PT-30 UC-3040 160 4989270943049
PT-30X1000 1,000 4989270943148
PT-30S UC-3030B/1030 160 4989270943223
PT-30SX1000 1,000 4989270943155
PT-40 UC-4050 160 4989270943056

Hammering tool (Hand)

Hammering tool (Hand)

Hammering tool (Machine)
Size Anchor size Part No. Length(mm) JAN Code
SD-30 UC-3040 160 4989270945043
SD-30X500 500 4989270945180
SD-30X1000 1,000 4989270945142
SD-30S UC-3030B/1030 160 4989270945227
SD-30SX500 500 4989270945173
SD-30SX1000 1,000 4989270945166
SD-40 UC-4050 160 4989270945050

Hammering tool (machine) [SDS type]

Hammering tool (Machine) [SDS type]

Unicon anchor bucket set
Part No. Anchor Part No.
Prepared Hole Drill
Hammering Rod
JAN Code
UB-01 UC-3030B(500 pcs.) UX12.5(2 pc.) SD-30S(1 pc.) 4989270946019
UB-02 UC-3040(500 pcs.) UX12.5(2 pc.) SD-30(1 pc.) 4989270946026
UB-03 UCS-3030B(200 pcs.) UX12.5(1 pc.) SD-30S(1 pc.) 4989270946033
UB-05 UC-3030B(500 pcs.) UX12.5(1 pc.) SD-30S(1 pc.) 4989270946057
Part No. Anchor Part No. クイックホルダービット JAN Code
UB-21 UC-3030B(500 pcs.) UC-3030-SDS(1 pc.) 4989270946323

*For the set contents, please feel free to contact us.

Site Map