ANCHOR

Bolt plug

Screw Type

  • ■This plug is ideal when installing into blocks.

Dimensional Drawing

Bolt plug

Uses

Concrete•Block

Installation method

  1. Drill preparation hole.
  2. Posi-tion plug.
  3. Pull out bolt hard to make rotation stopper grip outside.
  4. Loosen bolt to left, and remove.
  5. Insert fixture and tighten with bolt to open outer cylinder and lock securely.

■Uses

Water pipe, sanitation, air-conditioning/heating equipment attachment work, and general wiring, plumbing, interior/exterior work.

Precautions on use

  • Wear safety protection equipment such as eye protection glasses, a helmet etc. during use.
  • Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
  • Drill the preparation hole vertically against the drilled material surface.
  • Blow the hole thoroughly to remove shavings inside.
Bolt plugFC=21N/mm2
Size Bolt dia Head Dia
(mm)
Length
(mm)
Drilling condition
(mm)
Embedment
depth

(mm)
Maximum
extraction strength

(kN)
Pcs./box Pcs./ctn JAN Code
Preparation
hole diameter
Penetration
hole depth
#100 M4 Round head 7.0 17.5 7.5 25 17.5 1.0 100 1,500 4989270800014
#200 M5 8.0 20.5 8.5 30 20.5 3.4 50 750 4989270800021
#300 M6 10.0 27.0 10.5 35 27.0 8.8 50 600 4989270800038
#400 M8 Hexagon head 13.5 32.0 14.0 45 32.0 11.2 50 250 4989270800045
#500 M10 17.5 38.0 18.0 50 38.0 12.3 50 200 4989270800052
#600 M12 19.2 45.0 20.0 60 45.0 17.1 25 100 4989270800069

Site Map