Foundation work using steel reinforcers etc., highway construction, tunnel construction, installation work for vibrating machines.
Temperature(°C) | -5 | 5 | 20 | 30 |
---|---|---|---|---|
Initial Hardening Time (min.) | 300 | 60 | 20 | 10 |
(Do not move the anchor bar during the hardening time.)
Make sure to cut the edge of the anchor bar 45°for use.
Use one with an irregular surface for the hex head set screw or deformed steel bar.
Size | Dia*Length (mm) |
Volume (ml) |
Bolt used (deformed bar) |
Basic drill conditions |
Tensile strength (kN) |
Pcs./box | Pcs./ctn | JAN Code | |
---|---|---|---|---|---|---|---|---|---|
Dia(mm) | Depth(mm) | ||||||||
SE-10* | 10.8×90 | 6.6 | M10, W3/8 | 12.0 | 90 | 46.1 | 10 | 200 | 4989270930049 |
D10 | 13.0 | 35.6 | |||||||
SE-12* | 12.7×100 | 9.8 | M12, W1/2 | 14.0 | 110 | 69.7 | 10 | 200 | 4989270930056 |
D13 | 16.0 | 64.7 | |||||||
SE-16* | 16.8×120 | 21.0 | M16, W5/8 | 18.0 | 130 | 107.6 | 10 | 100 | 4989270930063 |
D16 | 20.0 | 97.9 | |||||||
SE-20* | 21.5×175 | 53.0 | M20, W3/4 | 25.0 | 180 | 170.1 | 10 | 100 | 4989270930070 |
D19 | 25.0 | 147.3 | |||||||
SE-22* | 21.5×210 | 61.0 | M22, W7/8 | 26.0 | 220 | 196.9 | 5 | 50 | 4989270930087 |
D22 | 28.0 | 185.7 | |||||||
SE-24* | 25.0×180 | 76.0 | M24, W1 | 28.0 | 220 | 225.2 | 5 | 50 | 4989270930094 |
D25 | 32.0 | 240.3 |
Part No. | Convex Dimensions | Hammering Motor | JAN Code |
---|---|---|---|
T-1 | 12.7-mm square | Hammer drill | 4989270920033 |
T-2 | 19-mm square | Hammer drill | 4989270920040 |
S-1 | 12.7-mm square | Rotary hammer drill | 4989270920064 |
D-1 | 12.7-mm square | Percussion drill | 4989270920057 |