Cordless diamond core bit DJW type | CONCRETE DRILL | Products

■ When using the specially developed wax, no water cooling is required.
■ This special diamond production method is ideal on an impact electric driver.
Offers fast drilling and long life.
■ With the positioning guide, stable drilling is assured.

*The positioning guide is sold optionally.

DJW Type

◆Applicable Electric Tool: Cordless Drill / Driver Drill / Electric Drill(under 400W)

(663KB)

■Product promotion video

Smart phone and a tablet is here.

外形図

Uses

Ceramic tile•Stone material tile• Hard tile•Granite stone•Marble• Roof tile

<DIA>
5.0-15.0mm
(70*72*185)
<DIA>
20.0?35.0mm
(93×92×187)

*( ) The number inside is the package size. W*D*H(mm) As for size there is an the error of ±2mm depending upon the package.

■ Just apply the semi-dry wax to the drilling edge.

Due to the special cooling properties in the semi-dry wax, there is no need for using messy water when the wax is applied.

塗布イメージ

■ Drill Positioning Guide

Place the core drill bit in the V-slot and start drilling. While the drill is rotating, gently penetrate the material diagonally.
Once the diamond core drill bit totally penetrates the material 1-2 mm deep stop drilling and remove the guide. Then, continue drilling.

刃先スリットとダイヤ粒子

■ Drilling components

システム構成

■ Hexagonal shank

Due to its 6.35mm HEX shank, stable holding and positioning is assured.

六角軸シャンク

穿孔データ

Use the electric drill appropriate for the drill bit used.
Make sure to turn off the main switch and take out the power supply plug from the socket before attaching and detaching the drill bit.
Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so that it will not loosen or come off.
Wear protective glasses.
Drill holes vertically against the drilled material surface.
Read the instruction manual for the electrical drill before use and always observe instructions to ensure safe and correct operation.

**DJW Type**(Semi-dry wax was enclosed)Blister pack
Code	Diameter(mm)	Overall Length(mm)	Effective Length(mm)	Pcs./Box	JAN Code
DJW5.0X60S	5.0	60	15	5	4989270127081
DJW6.0X60S	6.0				4989270127098
DJW6.4X60S	6.4				4989270127104
DJW7.0X60S	7.0				4989270127111
DJW8.0X60S	8.0				4989270127128
DJW10.0X60S	10.0				4989270127135
DJW12.0X60S	12.0				4989270127142
DJW15.0X60S	15.0				4989270127159
DJW20.0X76S	20.0	76.0	15	3	4989270127166
DJW25.0X76S	25.0				4989270127173
DJW30.0X76S	30.0				4989270127180
DJW32.0X76S	32.0				4989270127197
DJW35.0X76S	35.0				4989270127203

**Positioning Guide V**
Code	Matching hole Diameter(mm)	JAN Code
DJW-PGD-V	5.0-35.0	4989270128040

During use and immediately after use, the core drill and cutting waste becomes very hot so take care of that to not touch it with bare hands.
In addition, after drilling porcelain shavings and used wax may be scattered around the work area, therefore prepare the surrounding area for it.