- HOME >
- Products >
- CONCRETE DRILL >
- Hexagonal shank UX bit
- ■Hammer drill exclusive bit efficiently transmits hammering rotation force without loss.
- ■Anchor insertion is smoothly performed because hole drilling close to a perfect circle is possible.
- ■Stable drilling ability is maintained by cross blades which seize less even when they contact reinforced steel and the cutting edge and outer diameter wear less.
◆Matching drill: Hammer drill
(640KB)
Uses
Concrete•Stone material• Block•Brick•Mortar•Slate•Japanese wall
■Cross blade
■The cross blade which has been developed consists of a main edge and an auxiliary edge, and has a larger cross angle and improved reinforced steel resistance performance. (Dia: over 16mm)
■Realizes hole drilling close to a perfect circle by proactively operating the auxiliary edge to outer circumference cutting.
■Hole drilling close to perfect circles realized.
Realizes performance hole drilling close to a perfect circle and anchor insertion is also smooth by adoption of the cross blade for cutting edge. In addition, vibration loads during work are reduced.
■Improvement in reinforced steel resistance performance
Stable drilling ability is maintained because cross blades seize less even when they contact reinforced steel and there is less friction between the cutting edge and outer diameter in comparison with the conventional product (one blade).
- Use the electric drill appropriate for the drill bit used.
- Make sure to turn off the main switch and take out the power supply plug from the socket before attaching and detaching the drill bit.
- Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so that it will not loosen or come off.
- Wear protective glasses.
- Drill holes vertically against the drilled material surface.
- Read the instruction manual for the electrical drill before use and always observe instructions to ensure safe and correct operation.
| Size | Dia(mm) | Overall length(mm) | Effective length(mm) | Pcs./box | JAN Code | |
|---|---|---|---|---|---|---|
| HUX10.0X280 | 10.0 | 280 | 162 | 6 | 4989270083363 | |
| HUX10.5X280 | 10.5 | 4989270083011 | ||||
| HUX12.0X280 | 12.0 | 4989270083035 | ||||
| HUX12.5X280 | 12.5 | 4989270083042 | ||||
| HUX12.7X280 | 12.7 | 4989270083059 | ||||
| HUX13.0X280 | 13.0 | 4989270083066 | ||||
| HUX14.0X280 | 14.0 | 4989270083073 | ||||
| HUX14.5X280 | 14.5 | 4989270083080 | ||||
| HUX15.0X280 | 15.0 | 4989270083097 | ||||
| HUX16.0X280 | 16.0 | 4989270083103 | ||||
| HUX16.5X280 | 16.5 | 4989270083110 | ||||
| HUX17.0X280 | 17.0 | 4989270083127 | ||||
| HUX18.0X320 | 18.0 | 320 | 202 | 1 | 4989270083370 | |
| HUX19.0X320 | 19.0 | 4989270083387 | ||||
| HUX20.0X320 | 20.0 | 4989270083394 | ||||
| HUX21.5X320 | 21.5 | 4989270083400 | ||||
| HUX22.0X320 | 22.0 | 4989270083417 | ||||
| HUX22.5X320 | 22.5 | 4989270083424 | ||||
| HUX23.0X320 | 23.0 | 4989270083431 | ||||
| HUX24.0X320 | 24.0 | 4989270083448 | ||||
| HUX25.0X320 | 25.0 | 4989270083455 | ||||
| HUX26.0X320 | 26.0 | 4989270083462 | ||||
| HUX27.0X320 | 27.0 | 4989270083479 | ||||
| HUX28.0X320 | 28.0 | 4989270083486 | ||||
| HUX30.0X320 | 30.0 | 4989270083493 | ||||
| HUX32.0X320 | 32.0 | 4989270083509 | ||||
| HUX33.0X320 | 33.0 | 4989270083516 | ||||
| HUX34.0X320 | 34.0 | 44989270083523 | ||||
(Price revised as of June 1, 2009)
| Size | Dia(mm) | Overall length(mm) | Effective length(mm) | Pcs./box | JAN Code | |
|---|---|---|---|---|---|---|
| HUXL16.0X420 | 16.0 | 420 | 302 | 1 | 4989270094345 | |
| HUXL18.0X420 | 18.0 | 4989270094215 | ||||
| HUXL19.0X420 | 19.0 | 4989270094222 | ||||
| HUXL20.0X420 | 20.0 | 4989270094239 | ||||
| HUXL22.0X420 | 22.0 | 4989270094246 | ||||
| HUXL23.0X420 | 23.0 | 4989270094291 | ||||
| HUXL24.0X420 | 24.0 | 4989270094253 | ||||
| HUXL25.0X420 | 25.0 | 4989270094260 | ||||
| HUXL26.0X420 | 26.0 | 4989270094307 | ||||
| HUXL28.0X420 | 28.0 | 4989270094277 | ||||
| HUXL30.0X420 | 30.0 | 4989270094284 | ||||
| HUXL32.0X420 | 32.0 | 4989270094314 | ||||
| HUXL34.0X420 | 34.0 | 4989270094321 | ||||
| HUXL24.0X505 | 24.0 | 505 | 387 | 1 | 4989270094109 | |
| HUXL25.0X505 | 25.0 | 4989270094116 | ||||
| HUXL26.0X505 | 26.0 | 4989270094123 | ||||
| HUXL28.0X505 | 28.0 | 4989270094147 | ||||
| HUXL30.0X505 | 30.0 | 4989270094154 | ||||
| HUXL32.0X505 | 32.0 | 4989270094161 | ||||
| HUXL33.0X505 | 33.0 | 4989270094178 | ||||
| HUXL34.0X505 | 34.0 | 4989270094185 | ||||
| HUXL35.0X505 | 35.0 | 4989270094338 | ||||
(Price revised as of June 1, 2009)
- Concrete drill bit
B Type/B Type Long - Cordless driver drill bit
RJ Type - Cordless percussion drill bit
BJ type - Cordless drill bit
for ceramic tile TJ type - Cordless diamond core bit
(Semi-dry) DJW type - Ceramic tile drill bit
TR Type - Stone drill bit SB Type
- Tip top bit (SDS-plus)
TT type - SDS Plus drill bit UX
- SDS-max bit SDS MAX type
- Hexagonal shank drill bit
HEX Type - Hexagonal shank UX bit
- Taper shank drill bit
TP Type - Bull point•Cold chisel•
Cutter•Scoop
