- HOME >
- Products >
- CONCRETE DRILL >
- SDS Plus drill bit UX
- ■Adopts a cross blade for cutting edge that enables penetration through deck plates.
- ■Hole drilling at nearly perfect circles enabled. This realizes smooth anchor insertion.
- ■Cross blade less likely to become trapped with less wear of the cutting edge and outside diameter, when hitting against reinforcement bars. Stable drilling ability is maintained.
◆Matching drill: Rotary hammer drill
(700KB)
Uses
Deck plate + Concrete•Block•
Brick•Mortar•Japanese wall•Stone
■Cross blade penetrates through deck plate
The cross blade developed to enable penetration through deck plate reduces the cross angle and prevents a reduction in drilling speed with the 2-edge (main, auxiliary) construction.
Realizes hole drilling at nearly a perfect circle by proactively operating the auxiliary edge to outer circumference cutting.
■Hole drilling at nearly perfect circles realized
Adopts the cross blade for cutting edge that enables not only penetration through deck plates but also hole drilling close to a perfect circle. In addition, anchor insertion is smoothly performed and the vibration burden during work is reduced.
■Installation Example (Unicon Anchor)
- Drill a hole above the deck plate at a specified hole diameter and to a specified hole depth.
- Remove shavings with a dust collector or blower.
- Strike a cone with a striking rod to set the anchor.
- Screw a full thread bolt, etc. This completes installation.
<Dia>
3.2?6.4mm
Overall length
110mm
(30*10*158)
<Dia>
3.4?5.5mm
Overall length
160mm
(30*10*212)
<Dia>
6.0-18.0mm
(37*13*214)
*( ) The number inside is package size. W*D*H(mm). As for size there is the error of ±2mm depending upon the package.
- Use the SDS chucking type electrical drills.
- Use the drill in the "Hammering-in" mode only.
- Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
- Push in the drill bit until the locked position.
- Wear eye protection glasses.
- Drill holes vertically against the drilled material surface.
- Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.
| Size | Dia(mm) | Overall Length(mm) | Effective Length(mm) | Pcs./box | JAN Code | |
|---|---|---|---|---|---|---|
| UX6.0X160 | 6.0 | 160 | 100 | 10 | 4989270111783 | |
| UX6.4X160 | 6.4 | 4989270111790 | ||||
| UX6.5X160 | 6.5 | 4989270111806 | ||||
| UX7.0X160 | 7.0 | 4989270111813 | ||||
| UX7.2X160 | 7.2 | 4989270111820 | ||||
| UX7.5X160 | 7.5 | 4989270111837 | ||||
| UX8.0X160 | 8.0 | 4989270111417 | ||||
| UX8.5X160 | 8.5 | 4989270111424 | ||||
| UX9.0X160 | 9.0 | 4989270111431 | ||||
| UX9.5X160 | 9.5 | 4989270111448 | ||||
| UX10.0X160 | 10.0 | 4989270111455 | ||||
| UX10.5X160 | 10.5 | 4989270111462 | ||||
| UX11.0X160 | 11.0 | 4989270111479 | ||||
| UX12.0X160 | 12.0 | 4989270111493 | ||||
| UX12.5X160 | 12.5 | 4989270111509 | ||||
| UX12.7X160 | 12.7 | 4989270111516 | ||||
| UX13.0X160 | 13.0 | 4989270111523 | ||||
| UX13.5X160 | 13.5 | 4989270111530 | ||||
| UX14.0X160 | 14.0 | 4989270111547 | ||||
| UX14.3X160 | 14.3 | 4989270111554 | ||||
| UX14.5X160 | 14.5 | 4989270111561 | ||||
| UX15.0X160 | 15.0 | 160 | 100 | 6 | 4989270111592 | |
| UX16.0X160 | 16.0 | 4989270111585 | ||||
| UX16.5X160 | 16.5 | 4989270111578 | ||||
| UX17.0X160 | 17.0 | 4989270111608 | ||||
| UX18.0X160 | 18.0 | 4989270111615 | ||||
(Price revised as of May 1, 2009.)
| Size | Dia(mm) | Overall Length(mm) | Effective Length(mm) | Pcs./box | JAN Code | |
|---|---|---|---|---|---|---|
| UXL8.0X210 | 8.0 | 210 | 150 | 1 | 4989270102019 | |
| UXL8.5X210 | 8.5 | 4989270102026 | ||||
| UXL9.0X210 | 9.0 | 4989270102033 | ||||
| UXL10.0X210 | 10.0 | 4989270102040 | ||||
| UXL10.5X210 | 10.5 | 4989270102057 | ||||
| UXL12.0X210 | 12.0 | 4989270102064 | ||||
| UXL12.5X210 | 12.5 | 4989270102071 | ||||
| UXL12.7X210 | 12.7 | 4989270102088 | ||||
| UXL14.0X210 | 14.0 | 4989270111622 | ||||
| UXL14.5X210 | 14.5 | 4989270102095 | ||||
| UXL15.0X210 | 15.0 | 4989270102101 | ||||
| UXL16.0X210 | 16.0 | 4989270102118 | ||||
| UXL17.0X210 | 17.0 | 4989270102125 | ||||
| UXL18.0X210 | 18.0 | 4989270111639 | ||||
| UXL19.0X210 | 19.0 | 4989270102132 | ||||
| UXL20.0X210 | 20.0 | 4989270102149 | ||||
| UXL10.0X260 | 10.0 | 260 | 200 | 1 | 4989270102156 | |
| UXL10.5X260 | 10.5 | 4989270102163 | ||||
| UXL11.0X260 | 11.0 | 4989270111264 | ||||
| UXL12.0X260 | 12.0 | 4989270102170 | ||||
| UXL12.5X260 | 12.5 | 4989270102187 | ||||
| UXL12.7X260 | 12.7 | 4989270102194 | ||||
| UXL13.0X260 | 13.0 | 4989270111288 | ||||
| UXL13.5X260 | 13.5 | 4989270111295 | ||||
| UXL14.0X260 | 14.0 | 4989270102200 | ||||
| UXL14.5X260 | 14.5 | 4989270111646 | ||||
| UXL15.0X260 | 15.0 | 4989270111653 | ||||
| UXL16.0X260 | 16.0 | 4989270111660 | ||||
| UXL16.5X260 | 16.5 | 4989270111677 | ||||
| UXL17.0X260 | 17.0 | 4989270111684 | ||||
| UXL17.5X260 | 17.5 | 4989270111349 | ||||
| UXL18.0X260 | 18.0 | 4989270111691 | ||||
| UXL19.0X260 | 19.0 | 4989270111714 | ||||
| UXL20.0X260 | 20.0 | 4989270111721 | ||||
| UXL21.5X260 | 21.5 | 4989270111356 | ||||
| UXL22.0X260 | 22.0 | 4989270111851 | ||||
| UXL22.5X260 | 22.5 | 4989270111363 | ||||
| UXL23.0X260 | 23.0 | 4989270102217 | ||||
| UXL24.0X260 | 24.0 | 4989270111868 | ||||
| UXL25.0X260 | 25.0 | 4989270111875 | ||||
| UXL26.0X260 | 26.0 | 4989270102224 | ||||
| UXL28.0X260 | 28.0 | 4989270111370 | ||||
| UXL10.0X350 | 10.0 | 350 | 290 | 1 | 4989270102231 | |
| UXL10.5X350 | 10.5 | 4989270102248 | ||||
| UXL11.0X350 | 11.0 | 4989270102255 | ||||
| UXL12.0X350 | 12.0 | 4989270102262 | ||||
| UXL12.5X350 | 12.5 | 4989270102279 | ||||
| UXL12.7X350 | 12.7 | 4989270102286 | ||||
| UXL13.0X350 | 13.0 | 4989270102293 | ||||
| UXL13.5X350 | 13.5 | 4989270111301 | ||||
| UXL14.0X350 | 14.0 | 4989270102309 | ||||
| UXL14.3X350 | 14.3 | 4989270102316 | ||||
| UXL14.5X350 | 14.5 | 4989270102323 | ||||
| UXL15.0X350 | 15.0 | 4989270102330 | ||||
| UXL16.0X350 | 16.0 | 4989270102347 | ||||
| UXL16.5X350 | 16.5 | 4989270111738 | ||||
| UXL17.0X350 | 17.0 | 4989270111745 | ||||
| UXL17.5X350 | 17.5 | 4989270102354 | ||||
| UXL18.0X350 | 18.0 | 4989270111752 | ||||
| UXL19.0X350 | 19.0 | 4989270111769 | ||||
| UXL20.0X350 | 20.0 | 4989270111776 | ||||
| UXL22.0X350 | 22.0 | 4989270102361 | ||||
| UXL23.0X350 | 23.0 | 4989270102378 | ||||
| UXL24.0X350 | 24.0 | 4989270102385 | ||||
| UXL25.0X350 | 25.0 | 4989270102392 | ||||
| UXL26.0X350 | 26.0 | 4989270102408 | ||||
| UXL28.0X350 | 28.0 | 4989270111387 | ||||
| UXL10.0X450 | 10.0 | 450 | 390 | 1 | 4989270102415 | |
| UXL10.5X450 | 10.5 | 4989270102422 | ||||
| UXL12.0X450 | 12.0 | 4989270102439 | ||||
| UXL12.5X450 | 12.5 | 4989270102446 | ||||
| UXL12.7X450 | 12.7 | 4989270111271 | ||||
| UXL13.5X450 | 13.5 | 4989270102453 | ||||
| UXL14.5X450 | 14.5 | 4989270102460 | ||||
| UXL15.0X450 | 15.0 | 4989270111318 | ||||
| UXL16.0X450 | 16.0 | 4989270102477 | ||||
| UXL16.5X450 | 16.5 | 4989270111325 | ||||
| UXL17.0X450 | 17.0 | 4989270111332 | ||||
| UXL18.0X450 | 18.0 | 4989270102484 | ||||
| UXL19.0X450 | 19.0 | 4989270102491 | ||||
| UXL20.0X450 | 20.0 | 4989270102507 | ||||
| UXL22.0X450 | 22.0 | 4989270102514 | ||||
| UXL23.0X450 | 23.0 | 4989270102521 | ||||
| UXL24.0X450 | 24.0 | 4989270102538 | ||||
| UXL25.0X450 | 25.0 | 4989270102545 | ||||
| UXL26.0X450 | 26.0 | 4989270102552 | ||||
| UXL28.0X450 | 28.0 | 4989270111394 | ||||
(Price revised as of May 1, 2009.)
| Size | Dia(mm) | Overall Length(mm) | Effective Length(mm) | Pcs./box | JAN Code |
|---|---|---|---|---|---|
| UXLL10.0X1000 | 10.0 | 1,000 | 200 | 1 | 4989270111899 |
| UXLL12.0X1000 | 12.0 | 4989270111882 | |||
| UXLL12.5X1000 | 12.5 | 4989270111707 | |||
| UXLL14.5X1000 | 14.5 | 4989270115002 | |||
| UXLL16.5X1000 | 16.5 | 4989270115019 |
TOOL BOX SET
The tool box set is also convenient for carrying and storing.
- [SDS Plus drill bit UX set] Set of 10 [TB-21UX]
- (Overall length: 110mm type)3.5/4.3/4.8/5.0mm*each 1
- (Overall length: 160mm type)6.4/8.5/10.5/12.5/12.7/14.5mm*each 1
- JAN Code: 4989270102989
- Concrete drill bit
B Type/B Type Long - Cordless driver drill bit
RJ Type - Cordless percussion drill bit
BJ type - Cordless drill bit
for ceramic tile TJ type - Cordless diamond core bit
(Semi-dry) DJW type - Ceramic tile drill bit
TR Type - Stone drill bit SB Type
- Tip top bit (SDS-plus)
TT type - SDS Plus drill bit UX
- SDS-max bit SDS MAX type
- Hexagonal shank drill bit
HEX Type - Hexagonal shank UX bit
- Taper shank drill bit
TP Type - Bull point•Cold chisel•
Cutter•Scoop
