CONCRETE DRILL

Taper shank drill bit TP Type

Hammering+Rotation

  • ■All sizes can be interchanged using a single tapered-shank adaptor.
  • ■Offering economy with productivity : ideal for all kinds of sites requiring drilling.

*For hole drilling of stone material, use a drill for stone.

◆Matching drill: Hammer drill

Dimensional Drawing

Taper shank drill bit TP Type

Use

Concrete•Stone•Block•Brick•Mortar•
Slate•Japanese wall

Precautions on use

  • Use the drill appropriate for the drill bit used.
  • Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
  • Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or come off.
  • Wear eye protection glasses.
  • Drill holes vertically against the drilled material surface.
  • Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.
Taper shank drill bit No.1 (short)
Size Dia(mm) Overall Length(mm) Effective Length(mm) Pcs./box JAN Code
TP6.4X100 6.4 100 50 10 4989270070059
TP6.5X100 6.5 4989270070066
TP7.0X100 7.0 4989270070073
TP7.5X100 7.5 4989270070080
TP8.0X115 8.0 115 60 10 4989270070097
TP8.5X115 8.5 4989270070103
TP9.0X115 9.0 4989270070110
TP9.5X115 9.5 4989270070127
TP10.0X120 10.0 120 70 10 4989270070134
TP10.5X120 10.5 4989270070141
TP11.0X120 11.0 4989270070158
TP12.0X120 12.0 4989270070165
TP12.5X120 12.5 4989270070172
TP12.7X120 12.7 4989270070189
TP13.0X120 13.0 4989270070196
TP13.5X120 13.5 4989270070202
TP14.3X120 14.3 4989270070219
TP14.5X120 14.5 4989270070226
TP14.7X120 14.7 4989270070233
TP16.0X130 16.0 130 80 6 4989270070240
TP16.5X130 16.5 4989270070257
TP17.0X130 17.0 4989270070264
TP17.5X130 17.5 4989270070271
TP18.0X130 18.0 4989270070288
TP19.0X160 19.0 160 110 6 4989270070295
TP21.5X160 21.5 4989270070301
TP22.0X160 22.0 4989270070318
Taper shank drill bit No.1 (long)
Size Dia(mm) Overall Length(mm) Effective Length(mm) Pcs./box JAN Code
TPL10.0X280 10.0 280 220 6 4989270071056
TPL10.5X280 10.5 4989270071063
TPL11.0X280 11.0 4989270071070
TPL12.0X280 12.0 4989270071087
TPL12.5X280 12.5 4989270071094
TPL12.7X280 12.7 4989270071100
TPL13.0X280 13.0 4989270071117
TPL13.5X280 13.5 4989270071124
TPL14.3X280 14.3 4989270071148
TPL14.5X280 14.5 4989270071155
TPL16.0X280 16.0 280 220 6 4989270071179
TPL17.0X280 17.0 4989270071186
TPL17.5X280 17.5 4989270071193
TPL18.0X280 18.0 4989270071209
Taper shank drill bit No.1 (long/for anchoring of slopes)
Size Dia(mm) Overall Length(mm) Effective Length(mm) Pcs./box JAN Code
TPSB10.0X280 10.0 280 220 6 4989270072053
TPSB10.5X280 10.5 4989270072060
TPSB11.0X280 11.0 4989270072077
TPSB12.0X280 12.0 4989270072084
TPSB12.5X280 12.5 4989270072091
Adapter
Size Overall Length(mm) Shank Cotter Pcs./box JAN Code
No.1 158 HEX attached 6 4989270070004
No.1-SDS 120 SDS none 1 4989270100008

*No. 1 = Morse taper (MT-1)

Cotter
JAN Code
4989270070028

Cotter

*Used for detaching bits.

Site Map

Copyright(C) 2012 UNIKA CO., LTD. All rights reserved.