Ceramic tile drill bit TR Type | CONCRETE DRILL | Products

■Ideal for drilling approximately 10 to 15 ceramic tiles.
■Uses a special ultra-hard tip to maintain drilling performance. Drills efficiently through even difficult materials.
■Even more outstanding cutting efficiency and durability is demonstrated if cooled using water when drilling.

TR type

◆Matching drill: Electric drill/Percussion drill(rotating mode)

Dimensional Drawing

Porcelain tile•Roof tile•Ceramic tile•Slate•ALC•Plasterboard•
Block•Brick•Mortar•Plastic

Asymmetrical grinding the ultra-hard tip of the cutting edge reduces cutting resistance, enabling work material drilling with low torque.

Asymmetric cutting edge shape

Drill bit of all sizes attachable to the 10-mm chuck.

Comparison of hole drilling count when water is used and not used

*The hole drilling count varies depending on the tile type.

*( ) The number inside is package size. W*D*H(mm). As for size there is the error of ±2mm depending upon the package.

For TR Type drill, use rotation mode only. Never use the vibration mode.
Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or coming off.
Wear eye protection glasses.
Drill holes vertically against the drilled material surface.
Operate the drill with water being poured onto the tip of the drill bit used for cooling.
Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.

**TR type**Blister pack
Size	Dia(mm)	Overall Length(mm)	Effective Length(mm)	Pcs./box	JAN Code
TR3.0X85	3.0	85	50	10	4989270060005
TR3.2X85	3.2				4989270060012
TR3.4X85	3.4				4989270060029
TR3.5X85	3.5				4989270060036
TR3.8X85	3.8				4989270060043
TR4.0X85	4.0				4989270060050
TR4.3X85	4.3				4989270060067
TR4.5X85	4.5				4989270060074
TR4.8X85	4.8				4989270060081
TR5.0X85	5.0				4989270060098
TR5.3X100	5.3	100	65	10	4989270060302
TR5.5X100	5.5				4989270060104
TR6.0X100	6.0				4989270060111
TR6.4X100	6.4				4989270060128
TR6.5X100	6.5				4989270060135
TR7.0X125	7.0	125	75	10	4989270060142
TR7.2X125	7.2				4989270060159
TR7.5X125	7.5				4989270060166
TR8.0X125	8.0				4989270060173
TR8.5X125	8.5				4989270060180
TR9.0X150	9.0	150	90	10	4989270060197
TR9.5X150	9.5				4989270060203
TR10.0X150	10.0				4989270060210
TR10.5X150	10.5				4989270060227
TR11.0X150	11.0				4989270060234

*Products any size outside the standard are also available by special order. Contact us for terms and conditions, etc.