Core drill for polyvinyl chloride pipe VPC type | CORE DRILL | Products

■Diamond abrasive grit most suitable for drilling in polyvinyl chloride pipe to the cutting edge.
■Prevents drill stopping when drilling rib pipe to achieve stable operation with no burrs.
■Expands the “drilling swarf discharge hole” on the flange part to reduce weight.
■Adopts center pin system enabling simple center positioning.

◆Effective length: 110 mm

◆Applicable electric tool: Electric drill/Percussion drill(rotating mode)

*This drill cannot be used on metallic pipes such as spiral pipes and cast-iron pipes, and metallic plates.

(692KB)

Hard polyvinyl chloride pipe•Rib pipe•FRPM pipe•PVC pipe•Marble plate•Soft siding plate

Align the center pin with the drilling position. Hold it tight and turn on the motor switch. [Rotation mode]
Stop the motor when the cutting edge is inserted approximately 5mm and remove the center pin.
Lightly press the body against the drilling groove and continue operation.

■Minimal amount of diamond dislodging, longer life and more grinding force in comparison with electrodeposition because the diamonds are firmly bonded.
■Less clogging and stable sharpness because diamonds are largely protruded and the space between them are deep.

Braze diamond is only in dry conditions. Do not use water.
Dressing is unnecessary for braze diamond.
Braze diamond cannot be used for steel pipes such as spiral pipes and duct pipes.

Matching core size(mm)	Nominal diameter of pipe installed socket(mm)
120	100
170	150
220	200

*Make sure to pay attention to the nominal diameter of socket and actual prepared hole size.

**VPC type** (Straight shank)
Code	Diameter(mm)	Center pin (Code)	Overall length(mm)	Effective length(mm)	JAN Code
BZ-VPC120ST	120	BZCP-No.1	235	110	4989270370029
BZ-VPC170ST	170				4989270370036
BZ-VPC220ST	220				4989270370043

**VPC type** (Center pin)*General attachment
Code	Overall length(mm)	Matching core size (mm)	JAN Code
BZCP-No.1	169	120-220	4989270371019

**VPC type** (Center drill)*Optional product
Code	Cutting edge diameter(mm)	Overall length(mm)	Matching core size (mm)	JAN Code
BZCD-No.1	10.0	180	120-220	4989270371118