◆Effective length: 25mm(Full depth: 25 mm)
◆Matching Drill: Electric drill/drilling machine/Percussion drill(rotating mode)
◇Ejector spring fitted as standard/compatible with pipes and stainless steel
<Gauge>
14-30mm
(52×36×140)
<Gauge>
31-40mm
(61×47×140)
<Gauge>
41-55mm
(76×61×140)
<Gauge>
60-80mm
(110×86×140)
<Gauge>
85-120mm
(150×126×140)
*Numerical values in ( ) indicate the package size. W × D × H (mm).
The size dimensions have an error of approximately 2mm depending on the package.
Cutting the shavings to one-third with respect to the cutting width using 3-ply cutters (outer, inner and intermediate cutting blades) has dramatically decreased cracks on the tip corner. This also includes inside cutting edges so debris can be discharged smoothly.
Pipes and curved-surface materials can be drilled at a throat depth of 25 mm.
Hole saw drilling has a smaller cutting area compared to steel drills, enabling short-time drilling.
Drilling swarf is efficiently discharged through the discharge grooves that are also compatible with thick steel plates. Clogging of drilling swarf between the work material and cutting edge makes drilling impossible, which leads to tips cracking and chipping.
An escape hole, which is convenient for shavings removal, is equipped with hole saws of all diameters.
After removing the main unit from the motor, insert the metal rod that fits through the hole, etc., into the shavings escape hole and push out debris.
Two-step structure of the center drill tip dampens impacts that occur when the center drill passes through, preventing cracking of the tungsten carbide/ultra-hard tip.
Stainless Steel | Common Steel | Aluminum |
---|---|---|
25-35 m/min | 40-60 m/min | 60-100 m/min |
Size | Diameter(mm) | Overall Length(mm) | Effective Length(mm) | Shank Dia(mm) | Pcs./box | JAN Code |
---|---|---|---|---|---|---|
MCTR-14 | 14 | 96 | 25 | 10/13 | 5 | 4989270470064 |
MCTR-15 | 15 | 4989270470071 | ||||
MCTR-16 | 16 | 4989270470088 | ||||
MCTR-17 | 17 | 4989270470095 | ||||
MCTR-18 | 18 | 4989270470101 | ||||
MCTR-19 | 19 | 4989270470118 | ||||
MCTR-20 | 20 | 4989270470125 | ||||
MCTR-21 | 21 | 4989270470132 | ||||
MCTR-22 | 22 | 4989270470149 | ||||
MCTR-23 | 23 | 4989270470156 | ||||
MCTR-24 | 24 | 4989270470163 | ||||
MCTR-25 | 25 | 4989270470170 | ||||
MCTR-26 | 26 | 4989270470187 | ||||
MCTR-27 | 27 | 4989270470194 | ||||
MCTR-28 | 28 | 4989270470200 | ||||
MCTR-29 | 29 | 4989270470217 | ||||
MCTR-30 | 30 | 4989270470224 | ||||
MCTR-31 | 31 | 96 | 25 | 10/13 | 3 | 4989270470231 |
MCTR-32 | 32 | 4989270470248 | ||||
MCTR-33 | 33 | 4989270470255 | ||||
MCTR-34 | 34 | 4989270470262 | ||||
MCTR-35 | 35 | 4989270470279 | ||||
Size | Diameter(mm) | Overall Length(mm) | Effective Length(mm) | Shank Dia(mm) | Pcs./box | JAN Code |
MCTR-36 | 36 | 101 | 25 | 10/13 | 3 | 4989270470286 |
MCTR-37 | 37 | 4989270470293 | ||||
MCTR-38 | 38 | 4989270470309 | ||||
MCTR-39 | 39 | 4989270470316 | ||||
MCTR-40 | 40 | 4989270470323 | ||||
MCTR-41 | 41 | 4989270470330 | ||||
MCTR-42 | 42 | 4989270470347 | ||||
MCTR-43 | 43 | 4989270470354 | ||||
MCTR-44 | 44 | 4989270470361 | ||||
MCTR-45 | 45 | 4989270470378 | ||||
MCTR-46 | 46 | 4989270470385 | ||||
MCTR-47 | 47 | 4989270470392 | ||||
MCTR-48 | 48 | 4989270470408 | ||||
MCTR-49 | 49 | 4989270470415 | ||||
MCTR-50 | 50 | 4989270470422 | ||||
MCTR-51 | 51 | 4989270470439 | ||||
MCTR-52 | 52 | 4989270470446 | ||||
MCTR-53 | 53 | 99 | 25 | 10/13 | 3 | 4989270470453 |
MCTR-54 | 54 | 4989270470460 | ||||
MCTR-55 | 55 | 4989270470477 | ||||
MCTR-60 | 60 | 99 | 25 | 10/13 | 1 | 4989270470484 |
MCTR-65 | 65 | 4989270470491 | ||||
MCTR-70 | 70 | 4989270470507 | ||||
MCTR-75 | 75 | 4989270470514 | ||||
MCTR-80 | 80 | 4989270470521 | ||||
MCTR-85 | 85 | 99 | 25 | 10/13 | 1 | 4989270470538 |
MCTR-90 | 90 | 4989270470545 | ||||
MCTR-95 | 95 | 4989270470552 | ||||
MCTR-100 | 100 | 4989270470569 | ||||
MCTR-110 | 110 | 4989270470576 | ||||
MCTR-120 | 120 | 4989270470583 |
Size | Diameter(mm) | Overall Length(mm) | Hole Saw Size(mm) | Remarks | JAN Code |
---|---|---|---|---|---|
STR-6SC | 6 | 64 | 14-120 | Standard Product (Stepped) | 4989270511224 |
STR-6 | 6 | 75 | 14-120 | Option | 4989270511132 |
*When drilling a metal plate with a thickness of 10 mm or more, use the center drill (STR-6) [option].
Size | Hole Saw Size(mm) | JAN Code |
---|---|---|
MCTR KS-No.1 | 20-120 | 4989270511163 |
*When the plate thickness is 10 mm or more, remove the spring before use.
Size | Set Dia(mm) | JAN Code | |||||
---|---|---|---|---|---|---|---|
TB-25 | 21 | 27 | 33 | 42 | 53 | - | 4989270470712 |
TB-27 | 21 | 21 | 27 | 27 | 33 | 33 | 4989270470729 |
TB-28 | 22 | 22 | 28 | 28 | 35 | 35 | 4989270470736 |
TB-32 | 25 | 28 | 30 | 32 | 38 | 50 | 4989270470743 |