unika : Rooty anchor SC Type

Simply hammer in the pin. Just by looking at the pin, completion of anchor can be confirmed.

Screw diameter and anchor unit diameter are the same, allowing use in small drill bores.

SC type is all stainless steel, making it highly corrosion resistant. Wide applications in high humidity locations.

1. Drill preparation hole.
2. Position anchor.
3. Strike pin with hammer.
4. Anchor attached with open lags.

Uses

Suited for all kinds of fixture attachments including construction, electrical, sanitation, airconditioning/heating, signboard attachment, seat attachment, and machine installation works.

Protective clothing including safety glasses and helmets must always be worm when installing.

Drill perpendicularly into target surface.

Compared with anchor insertion depth, drill holes should be 5mm deeper for M6, M8, M10; 7mm deeper for M12; 10mm deeper for M16, M20.

Drilling preparation holes too shallow will break or bend core rods.

Use blower throughly.

Always set nut before hammering.

Use a hammer appropriate for the anchor size.

SC type mm size (stainless)

Size	Dia	L(mm)	TL(mm)	Hole(mm)	Pcs./box	Pcs./ctn
SC-645	M6	45	15	6.4	50	800
SC-660	M6	60	20	6.4	50	800
SC-840	M8	40	15	8.5	50	800
SC-850		50	20		50	800
SC-870		70	25		50	400
SC-890		90	25		50	400
SC-810		100	35		50	400
SC-1050	M10	50	20	10.5	50	400
SC-1060		60	25		50	400
SC-1070		70	25		50	300
SC-1080		80	25		50	300
SC-1090		90	30		50	300
SC-1010		100	30		50	300
SC-1012		120	30		50	200
SC-1015		150	40		50	200
SC-1260	M12	60	25	12.7	30	240
SC-1270		70	25		30	240
SC-1280		80	25		30	180
SC-1290		90	30		30	180
SC-1210		100	30		30	180
SC-1212		120	50		30	120
SC-1215		150	50		30	120
SC-1680	M16	80	30	17.0	15	90
SC-1610		100	40		15	90
SC-1612		120	40		15	90
SC-1615		150	40		15	60
SC-1619		190	50		15	60
SC-2013	M20	130	50	21.5	10	40
SC-2015		150	50		10	40
SC-2019		190	50		10	40

*Special dimensions for both C and SC types can be produced to order.

SC type Inch size (stainless)

Size	Dia	L(mm)	TL(mm)	Hole(mm)	Pcs./box	Pcs./ctn
SC-3060	W3/8	60	25	10.0	50	400
SC-4070	W1/2	70	25	13.5	30	240

*Special dimensions for both C and SC types can be produced to order.