ANCHOR

NP ALC anchor NBA Type

Knock-in type

  • ■Tapped anchor specially for ALC panels, with 3-stage protrusions boasting high pull-out strength and retaining strength.
  • ■Excellent weather and heat resistance. Unique corrosion resistant nylon design.

Dimensional Drawing

NP ALC anchor NBA Type

Uses

ALC

Installation method

  1. Drill preparation hole.
  2. Position anchor.
  3. Hammer in pin using special striking rod.
  4. Installation complete.

■Uses

For attaching fixtures and equipment to ALC panel.

Precautions on use

  • Wear safety protection equipment such as eye protection glasses, a helmet etc. during use.
  • Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
  • Drill the preparation hole vertically against the drilled material surface.
  • Blow the hole thoroughly to remove shavings inside.
  • Use the attached striking rod.
NBA type (NP ALC Anchor)
Size Bolt size Hole dia
(mm)		 Length
(mm)		 Thread Length
(mm)		 Drilling condition
(mm)		 Tensile strength
kN (kgf)		 Pcs./box Pcs./ctn JAN Code
Preparation
hole diameter		 Penetration
hole depth
NBA-859 M8 12 59 20 11.5 59 1.8(180) 35 350 4989270821101
NBA-1060 M10 14 60 20 14.0 60 2.7(280) 30 300 4989270821118
NBA-2559 W5/16 12 59 20 11.5 59 1.8(180) 35 350 4989270821125
NBA-3860 W3/8 14 60 20 14.0 60 2.7(280) 30 300 4989270821132

Site Map

Copyright(C) 2012 UNIKA CO., LTD. All rights reserved.